mold cavity
英 [məʊld ˈkævəti]
美 [moʊld ˈkævəti]
模巢；模腔
双语例句
- Molten metal is poured into a mold cavity formed out of sand.
将熔化的金属倒入由型砂做成的铸模的型腔中。 - Besides this, it also covers the CAD/ CAM for the mold cavity, and generating G-Code instructions for CNC machine by the advanced software.
除此之外，还包括模具型腔的CAD/CAM部分，并利用先进软件将其加工部分直接生成NC文件。 - Study on establishing the mold cavity with technology of automatic parting surface based on Pro/ E
基于Pro/E利用自动分型面技术创建模具型腔研究 - Taking injection mold design and mold cavity NC machining of the plastic shell as an example, stated the technology and step of mold designing and NC machining using CAD/ CAM software in details.
以一塑料外壳注射模的设计和模具型腔的数控加工为例，较为详尽地讲述了运用CAD/CAM软件进行注射模设计和数控加工的工艺和步骤。 - In order to ensure requirement of taper and size in machining complex mold cavity, it must depend on precision and reliable programming method of WEDM machine.
为使复杂型腔能在加工中保证锥度及尺寸要求，必须以线切割机床的精度和可靠的编程方法为前提。 - The temperature on mold cavity's surface affects the melt's flow and cooling in the course of injection molding, then has an important part in the solution of injection molding.
在注塑加工数值模拟过程中，模腔的表面温度直接影响塑料熔体的流动和固化过程，所以模腔表面温度的计算对注塑数值模拟的结果起着极为重要的作用。 - Optimization of Processing Parameters in Multi-Cavity Injection Molding Based on Volumetric Shrinkage ELECTROFORMING TECHNOLOGY OF INJECTION MOLD CAVITY WITH THE ORIGINAL PLASTICS PRODUCT AS MOLD CORE
基于制品体收缩率的多型腔注塑模工艺参数优化用原塑料制件为模芯电铸注塑模型腔工艺 - The mold cavity was obtained by splitting mold base in parting surface.
模具型腔可采用分型面分割模板的方法获取。 - The inner surface of the mold cavity to the vertical machining processing network flakes after the formation of the surrounding tooth structure.
该模具的内外表加工的纵向凹槽使加工后的网石片的周边构成齿形构造。 - Study on Mold Cavity Parting Technology based on Pro/ E
基于Pro/E模具型腔分型技术的研究 - Process Research on Fabrication of Micro-injection Mold Cavity of Cell Culture Device Based on UV-LIGA Technology
基于UV-LIGA制作细胞培养器微注塑模具型腔的工艺研究 - Through some NC machining examples, introduced application of parametric program in mold cavity milling.
基于具体加工实例，介绍了参数化程序在模具型腔铣削中的应用。 - This article presents a study of the technology of virtual mold-repair for the optimal design of the mold cavity of a hollow turbine blade to precisely control its shape.
针对精铸空心涡轮叶片的精确控形问题，开展模具型腔优化设计中的虚拟修模技术研究。 - Casting is a manufacturing process in which molten metal is poured or injected and allowed to solidify in a suitably shaped mold cavity.
铸造是一种将熔化的金属倒入或注入合适的铸模腔并且在其中固化的制造工艺。 - ELECTROFORMING TECHNOLOGY OF INJECTION MOLD CAVITY WITH THE ORIGINAL PLASTICS PRODUCT AS MOLD CORE Some Reasons Behind and Control Measures of Sudsing of the Printing of Plastic Articles Used in Automobile
用原塑料制件为模芯电铸注塑模型腔工艺汽车塑料件油漆起泡的原因及控制方法 - Protection from exposure to mold cavity Antirust excessive spraying is critical, as it would cause serious or bond percolation melting;
保护暴露的型腔模免受防锈剂的过量喷洒是至关重要的，因为这会引起严重的粘结或渗溶； - Study on Exhausting of Permanent Mold Cavity in Low-pressure Casting
金属型低压铸造型腔排气的研究 - In addition, the factors influencing mold cavity temperature are analyzed by the means of processing conditions and cooling channels changing.
通过改变工艺条件和冷却设计，分析了影响型腔温度的各种因素。 - Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。 - Aiming at the problem of development period in general mold cavity design and manufacturing process, a feature-based injection mold cavity design and manufacturing system was constructed.
针对一般注塑模具型腔设计制造周期问题，构建了基于特征技术的注塑模具型腔设计制造系统。 - The electroforming method and technology of injection mold cavity with the original plastic product as mold core was introduced.
介绍了用原塑料制件为模芯电铸注塑模型腔的方法和工艺。 - Injection mould feed system is an important component of the structure design of injection mould, and is also the only channel for molten plastic flowing into mold cavity.
浇注系统是注塑模具结构设计中的一个重要组成部分，也是塑料熔体进入模具型腔的唯一通道。 - Study of the NURBS Describing Method on the Mold Cavity of the Molding Tool
模具型腔的NURBS几何描述方法的研究 - An investigation was carried out into the effects of the entry position of molten metal into the mold cavity and the characteristics of coating layer on the surface recarburization of steel castings in lost foam casting.
试验研究了金属液的引入位置和涂料层性质对消失模铸钢件表面增碳的影响。 - Analyse of strength and toughness to circular mold cavity in injection molding
注射模具中圆形型腔强度与刚度的分析计算 - Analysis of flowing paths of injection mold cavity in plastic melt
注塑模腔塑料熔体流场流动路径分析 - In this article, a method of NC ECM mold cavity using rotative tool electrode was introduced.
提出了一种利用旋转电极数控电解加工模具型腔的方法。 - After analyzing the characteristic combination of mold cavity machining and making the characteristic decomposition, the machining methods and tools of various typical characteristics were decided.
分析了模具型腔加工特征组合，并进行特征分解，确定了各种典型特征的加工方法和刀具； - A KBE based mold cavity design system is presented, and key technologies of this system are discussed.
提出了一种基于KBE技术的注塑模具型腔设计系统的框架。 - The process parameters of injection molding are in direct relation to the flow, molding and cooling condition of melt in the mold cavity, with the most direct impact on the quality of injection molding products.
注塑成型工艺参数直接决定了熔体在模具型腔中的流动、充模和冷却状态，对注塑制品质量有着最直接的影响。